
Product Category
- 1Litium Battery Safety Protection
- 2Flow Meter|Senseca
- 3Fire detector
- 4Differential Pressure - เครื่องวัดความดันแตกต่าง
- 5IST Sensors
- 6เครื่องวัดอุณหภูมิความแม่นยำสูง
- 7Water leak sensor เซ็นเซอร์ตรวจจับน้ำรั่ว
- 8Level Sensors
- 9Air pressure measurement
- 10Conductivityเครื่องวัดความนำไฟฟ้าของสารละลาย
- 11Material moisture วัดความชื้นวัสดุ แบบพกพา
- 12Material moisture วัดความชื้นวัสดุ แบบติดตั้ง
- 13วัดความชื้นอากาศแบบติดตั้ง
- 14pH /Redox (ORP) อิเล็กโทรด โพรบ สารละลาย
- 15Safety Senseca
- 16Plug-on displays
- 17Evaluation Kit | Figaro gas detector
- 18Transmitters
- 19Isolation amplifier/ Supply isolator
- 20Indicator (cabinet)
- 21Indicator (field housing)
- 22Control technology
- 23Power electronic
- 24Pressure Sensors
- 25Temperature
- 26Preesure Sensor พกพา
- 27เครื่องวัดออกซิเจนในกระบวนการเผาไหม้
- 28เครื่องวัดออกซิเจนระดับ PPM
- 29ออกซิเจนในของเหลว (Air oxygen measurement)
- 30เครื่องวัดออกซิเจนในอากาศ Air oxygen measurement
- 31Oxygen Measurement
- 32Thermometer for Food Phama
- 33Vacum manometer
- 34Portables: Product Range, Application Range
- 35Display Indicator จอแสดงผล Input 4-20 mA ไม่ใช้ Power Supply
- 36เครื่องวัดอุณหภูมิ/ความชื้น/Dewpoint แบบพกพา
เครื่องวัดออกซิเจน / เครื่องวิเคราะห์ O₂ รุ่น ECO 410(T) (เดิมคือ G 1690)
ECO 410(T)
ECO 410(T) - เครื่องวัดออกซิเจน / เครื่องวิเคราะห์ O₂ (เดิมคือ G 1690)
ผู้ผลิต
ECO 410 / 410T ถูกออกแบบมาให้เน้นเฉพาะฟังก์ชันหลักของเทคโนโลยีการวัด เพื่อให้ได้ค่าความเข้มข้นของออกซิเจน (O₂) ในก๊าซที่มีความน่าเชื่อถือ โดยใช้เซนเซอร์รุ่น GOEL 370 และ GOEL 381 ซึ่งเหมาะสำหรับสภาพแวดล้อมที่มีความชื้น ช่วยเพิ่มความเชื่อถือได้และอายุการใช้งานที่ยาวนาน
จุดเด่นของอุปกรณ์นี้อยู่ที่การออกแบบที่ใช้งานง่าย ป้องกันน้ำ และมีไฟส่องสว่างที่หน้าจอ ทำให้ ECO 410 / 410T เป็นเครื่องตรวจวัดก๊าซแบบจุ่มที่มีความแม่นยำและราคาประหยัด นอกจากนี้ยังเป็นอุปกรณ์เริ่มต้นที่มีคุณภาพสูงสำหรับการวัดออกซิเจนในลักษณะอื่น ๆ เช่น การวัดก๊าซเฉื่อย (inert gas)
คำเตือน:
อุปกรณ์นี้ใช้สำหรับการควบคุมเสริมเท่านั้น ไม่สามารถทดแทนอุปกรณ์วัดที่ได้รับการรับรองหรือวิธีการที่ปลอดภัยในการสร้างส่วนผสมของก๊าซได้!
หน้าจอแสดงผล
หน้าจอ LCD แบบสามบรรทัดพร้อมแสงไฟ ช่วยเพิ่มความชัดเจนและมองเห็นได้ดีในทุกสภาพแสง ทั้งกลางวันและกลางคืน ฟังก์ชัน HOLD ช่วยให้สามารถหยุดค่าที่แสดงผลบนหน้าจอได้
แหล่งพลังงาน
ใช้งานด้วยแบตเตอรี่ AA จำนวน 2 ก้อน การออกแบบที่ประหยัดพลังงานและฟังก์ชันปิดอัตโนมัติที่สามารถตั้งค่าได้ ช่วยให้ใช้งานได้นานขึ้น นอกจากนี้ยังสามารถปรับแสงไฟของหน้าจอเพื่อประหยัดพลังงานเพิ่มเติม
อัตราการวัด: 1 ครั้ง/วินาที
แหล่งจ่ายไฟ: แบตเตอรี่อัลคาไลน์ AA จำนวน 2 ก้อน (มีให้ในชุด)
การใช้พลังงาน: ประมาณ 0.8 mA, ประมาณ 2.8 mA เมื่อเปิดไฟหน้าจอ
น้ำหนัก: ประมาณ 175 กรัม (รวมแบตเตอรี่และเซนเซอร์)
วัสดุโครงเครื่อง: ABS ที่ทนต่อการแตกหัก, ช่องใส่แบตเตอรี่แบบขันสกรู
ช่วงการวัด: 0.0 ... 100.0% โดยปริมาตรของ O₂ (แนะนำสำหรับช่วง 0.2 ... 35.0% O₂ เพื่อความแม่นยำสูงสุด)
การเชื่อมต่อ: เกลียว M16x1, ช่องเสียบปลั๊กขนาด 3.5 มม.
เวลาตอบสนอง: 90% ภายใน 10 วินาที (ขึ้นอยู่กับอุณหภูมิ)
สภาวะการทำงาน: อุณหภูมิ -20 ... +50 °C; ความชื้นสัมพัทธ์ 0 ... 95% (อาจมีการกลั่นตัวเล็กน้อย)
อุณหภูมิปกติในการใช้งาน: 25 °C
อุณหภูมิในการเก็บรักษา: -20 ถึง 50 °C (ไม่รวมแบตเตอรี่)
ระดับการป้องกัน: IP65 / IP67, เซนเซอร์ระดับ IP54
สายเซนเซอร์: ความยาว 0.95 ม., ปลั๊กเสียง, มีตัวป้องกันเซนเซอร์ที่ยืดหยุ่น
หน้าจอแสดงผล: จอ 3 บรรทัดพร้อมแสดงสถานะแบตเตอรี่, มีไฟหน้าจอ, สามารถกลับด้านหน้าจอได้เพียงกดปุ่ม
ขนาด: 108 x 54 x 28 มม. (ไม่รวมสายและเซนเซอร์)
ความแม่นยำของการวัด (ที่เซนเซอร์และตามช่วงการวัด):
-
ECO 410-35 (เซนเซอร์ GOEL 370):
- ช่วง < 35% O₂: ความคลาดเคลื่อน -0.2 ถึง +0.35% O₂
- ช่วง 35-100% O₂: ไม่ระบุความแม่นยำ
- อายุการใช้งานเซนเซอร์ (ที่ O₂ 20.9%): ประมาณ 2 ปี
-
ECO 410-MAX (เซนเซอร์ GOEL 381):
- ช่วง < 35% O₂: ความคลาดเคลื่อน ± 0.25% O₂
- ช่วง 35-100% O₂: ความคลาดเคลื่อน ± 2% จาก (ค่าที่วัด - 20.9% O₂)
- อายุการใช้งานเซนเซอร์ (ที่ O₂ 20.9%): มากกว่า 3 ปี
ECO 410(T) - O₂-Analyser / air oxygen meter (formerly G 1690)
The ECO 410 / 410T deliberately focuses on the essential functions of measurement technology for reliable measurement of the O2 concentration in gases. The sensors used, GOEL 370 and GOEL 381, which are especially suitable for wet environments, are essential for reliability and durability.
The devices also impress with their ergonomics, water protection and display backlight.
This makes the ECO 410 / 410T an inexpensive and precise immersion gas detector, but it is also an inexpensive yet high-quality entry-level device for many other oxygen measurements - for example inert gas measurements.
ATTENTION:
The device is used for additional control. It does not replace an approved measuring device or safe methods for creating gas mixtures!
Display
Thanks to the backlight, the three-line LCD display offers ergonomic wide-angle visibility - by day and by night.
The HOLD function enables the display values to be frozen.
Power supply
2 powerful AA batteries, the energy-saving design and the configurable automatic switch-off function
ensure long operation.
Configurable LCD backlight for further energy saving options.
- Measurement rate:
- 1 meas/s
- Power supply:
- 2 x AA-Alkaline batteries (scope of delivery)
- Power consumption:
- ca. 0.8 mA, ca. 2.8 mA with backlight
- Weight:
- ca 175 g (including batteries and sensor)
- Housing material:
- break proof ABS, screw locked battery compartment
- Measuring range:
- 0,0 ... 100.0 % by volume O₂ recommended for 0.2 ... 35.0 % vol. O₂, outside reduced accuracy
- Connections:
- Thread M16x1, 3.5 mm audio plug socket
- Response time:
- 90% in < 10 sec., depending on temperature
- Operating conditions:
- -20 ... +50 °C; 0 ... 95 % r.h. (short-term condensation possible)
- Nominal temperature:
- 25 °C
- Storage temperature:
- -20 to 50 °C (without batteries)
- Protection type:
- IP65 / IP67, Sensor IP54
- Sensor cable:
- 0.95 m, audio plug, elastic sensor protector
- Display:
- 3-line with battery status indicator, Backlight, protected by shatterproof screen, overhead display at the push of a button
- Dimensions:
- 108 * 54 * 28 mm (instrument without cable and sensor)
- Accuracy calibrated to ambient air, constant ratios to the :
-
ECO 410-35:
Sensor GOEL 370
< 35 vol. % O₂: -0.2 … +0.35 vol. % O₂
35…100 vol. % O₂: not specified
Sensor life time at 20.9 vol. % O2 ca 2 years
ECO 410-MAX:
Sensor GOEL 381
< 35 vol. % O₂: ± 0.25 vol. % O₂
35…100 vol. % O₂: ± 2% * (value - 20.9 vol. % O₂)
Sensor life time at 20.9 vol. % O2 >3 years
ECO 410(T) - O₂-Analyser / air oxygen meter (formerly G 1690)
The ECO 410 / 410T deliberately focuses on the essential functions of measurement technology for reliable measurement of the O2 concentration in gases. The sensors used, GOEL 370 and GOEL 381, which are especially suitable for wet environments, are essential for reliability and durability.
The devices also impress with their ergonomics, water protection and display backlight.
This makes the ECO 410 / 410T an inexpensive and precise immersion gas detector, but it is also an inexpensive yet high-quality entry-level device for many other oxygen measurements - for example inert gas measurements.
ATTENTION:
The device is used for additional control. It does not replace an approved measuring device or safe methods for creating gas mixtures!
Display
Thanks to the backlight, the three-line LCD display offers ergonomic wide-angle visibility - by day and by night.
The HOLD function enables the display values to be frozen.
Power supply
2 powerful AA batteries, the energy-saving design and the configurable automatic switch-off function
ensure long operation.
Configurable LCD backlight for further energy saving options.
- Measurement rate:
- 1 meas/s
- Power supply:
- 2 x AA-Alkaline batteries (scope of delivery)
- Power consumption:
- ca. 0.8 mA, ca. 2.8 mA with backlight
- Weight:
- ca 175 g (including batteries and sensor)
- Housing material:
- break proof ABS, screw locked battery compartment
- Measuring range:
- 0,0 ... 100.0 % by volume O₂ recommended for 0.2 ... 35.0 % vol. O₂, outside reduced accuracy
- Connections:
- Thread M16x1, 3.5 mm audio plug socket
- Response time:
- 90% in < 10 sec., depending on temperature
- Operating conditions:
- -20 ... +50 °C; 0 ... 95 % r.h. (short-term condensation possible)
- Nominal temperature:
- 25 °C
- Storage temperature:
- -20 to 50 °C (without batteries)
- Protection type:
- IP65 / IP67, Sensor IP54
- Sensor cable:
- 0.95 m, audio plug, elastic sensor protector
- Display:
- 3-line with battery status indicator, Backlight, protected by shatterproof screen, overhead display at the push of a button
- Dimensions:
- 108 * 54 * 28 mm (instrument without cable and sensor)
- Accuracy calibrated to ambient air, constant ratios to the :
-
ECO 410-35:
Sensor GOEL 370
< 35 vol. % O₂: -0.2 … +0.35 vol. % O₂
35…100 vol. % O₂: not specified
Sensor life time at 20.9 vol. % O2 ca 2 years
ECO 410-MAX:
Sensor GOEL 381
< 35 vol. % O₂: ± 0.25 vol. % O₂
35…100 vol. % O₂: ± 2% * (value - 20.9 vol. % O₂)
Sensor life time at 20.9 vol. % O2 >3 years
Datasheet
